2004 Honda Accord Wiper Blade Size – A Complete Guide

The 2004 Honda Accord came equipped with two different wiper blade lengths from the factory. The driver’s side blade measures 26 inches, while the passenger side is 18 inches. Using the proper OEM blade sizes ensures maximum coverage of the windshield without any unsightly gaps or chattering.

Keeping fresh wiper blades on your Accord is crucial for maintaining visibility in wet weather. Worn-out blades can severely reduce visibility, putting you and your passengers at risk. Replacing blades annually or when cracking, streaking, or squeaking occurs guarantees you always have a clear view ahead.

Throughout this guide, we will cover the 2004 Honda Accord wiper blade sizes for both sides of the vehicle. We’ll also provide top replacement recommendations and tips for identifying when it’s time to change your blades.

Table of Contents

OEM 2004 Honda Accord Wiper Blade Sizes

The 2004 Accord came equipped with the following OEM wiper blade lengths from the factory:

  1. Driver’s Side – 26 inches
  2. Passenger Side – 18 inches

Honda engineered the asymmetric blade lengths to provide complete windshield coverage on both sides of the vehicle. The larger 26-inch blade is necessary on the driver’s side to reach the bottom outer corners of the glass. While a shorter 18-inch blade sufficiently covers the passenger side.

Always check your owner’s manual as a reference, but these sizes should match all trim levels of the 2004 Accord, including LX, EX, and SE. Using anything other than the OEM sizes risks leaving unwiped areas that can dangerously obstruct your view.

Top Replacement Options

Luckily many aftermarket companies like Bosch manufacture direct replacement blades in the 2004 Honda Accord wiper blade sizes. Here are excellent options guaranteed to fit precisely while delivering streak-free wiping performance:

Driver’s Side 26-inch Blade

  1. Bosch ICON 26A Wiper Blade – OE-specific bracket precisely locks in place. An asymmetric spoiler distributes uniform downward force across the blade for chatter-free wiping.
  2. ANCO 31-Series 26 – Durable rubber compound resistant to heat, cracking, and tearing. Aerodynamic design reduces wind lift and noise while wiping.

Passenger Side 18-inch Blade

  1. Bosch ICON 18A Wiper Blade – Exclusive FX dual rubber resists heat and ozone deterioration for longer life. Patented tension spring arcing provides consistent pressure along the entire blade length.
  2. TRICO NeoForm 18 – Neoform rubber adapts to the shape of the windshield for uniform contact. Pre-installed small j-hook adapters make installation quick and easy.

Using top-rated blades specifically designed for the 2004 Honda Accord guarantees you receive uncompromising wiping in all conditions. Always consult your owner’s manual prior to purchasing replacements.

Also Read: 2005 Honda Accord Wiper Blade Size

When to Change Your Wiper Blades?

It’s important to regularly inspect your blades and proactively replace them when any signs of wear appear. Waiting for complete blade failure often leads to unexpectedly dangerous road visibility.

Here are key signs it’s time to install fresh 2004 Honda Accord wiper blades:

  1. Streaking/Smearing – Blade’s unwipe sections leave streaks scattering water droplets. Reduced wiping performance from coating wear or cracks.
  2. Chattering/Skipping – Blade skips and bounces across the windshield, indicating loss of proper contact with the glass.
  3. Squeaking/Noise – Friction and poor contact with the windshield cause blades to squeak loudly while wiping.
  4. Cracking/Tears – Heat, sun exposure, and wear cause the blade to develop small cracks and tears. These expand over time.
  5. Visibility Obstruction – Worn blades allow unwiped water to remain, covering dangerous sections of your view.

Replacing blades every 6-12 months provides cheap insurance against being caught off guard by sudden blade failure. Checking them when washing your car takes only minutes.

Proper Installation

Taking a few simple steps when installing new blades ensures they mount flush to the windshield and wipe cleanly.

  1. Thoroughly clean the windshield of dirt and debris before installation.
  2. Carefully follow the manufacturer’s instructions for removing old blades and locking in new ones. Avoid bending or twisting new blades.
  3. Ensure the blade frames fully snap into their locked position on the wiper arm. Gently tug to verify a secure mount.
  4. Check blade angle and adjustment once mounted and turn on wipers to test performance.

Closely following the install instructions is key to maximizing the life of your new OEM spec 2004 Honda Accord wiper blades. Taking extra care prevents premature wear.

Keep an Extra Set Handy

Having fresh replacement blades stored in your Accord provides peace of mind against unexpected failure while out on the road. This is especially important if driving long distances in inclement weather.

Choose an extra set that matches the OEM 2004 Honda Accord wiper blade sizes:

  1. 26-inch Driver’s Side Blade
  2. 18-inch Passenger Side Blade

Stash these in your trunk or behind the seat so a quick roadside swap gets you back on the road safely. Remember to restock the set after installation to be ready for the next unexpected change.


Regularly changing your 2004 Honda Accord wiper blades using the factory spec sizes is a quick and inexpensive way to maintain optimal visibility behind the wheel. Investing in top-rated replacements like Bosch and ANCO ensures you receive unmatched quality that safely withstands years of use.

Consulting this guide makes selecting the proper 26-inch driver’s side and 18-inch passenger side blade quick and easy. Following our tips helps identify when it’s time for new blades and ensures your Accord handles like new during wet weather. With fresh wipers, you can confidently take on any storm, from drizzle to downpour.

Author's Image

Ammar Masoud

I have had a long and fulfilling career in the automotive industry, primarily with Honda and Acura. With 15 years of experience as a Honda service technician, I became highly skilled in repair and maintenance, gaining a deep understanding of these vehicles. After many years in the automotive field, I decided to embark on a second career in industrial manufacturing. It was a significant change, but I found that the skills I had honed in the automotive industry were incredibly valuable in my new role. In my current position in industrial manufacturing, the demand for quality workmanship and meticulous attention to detail is paramount. Fortunately, these are traits that I have cultivated throughout my years in the automotive industry. I take pride in applying these skills to meet the high standards expected in the manufacturing sector.