Improving your vehicle’s performance often starts with customizing the Build A Custom Cold Air Intake. An aftermarket cold air intake allows cooler, denser air to enter the engine, resulting in more power and better efficiency. With some basic tools and materials, you can construct your own cold air intake tailored specifically for your vehicle. This provides the best fit while saving money over buying a pre-made kit.
Assessing Your Goals
Determining the purpose behind adding a cold air intake helps guide the design. Those seeking maximal horsepower may utilize a longer intake pipe that draws air from behind the front bumper. Applications focused on fuel efficiency tend to place the air filter in the engine bay to utilize cooler air without adding piping length.
Carefully consider your priorities to build the optimal cold air intake for your application. Power gains range from 5 to 15 horsepower depending on the vehicle. Fuel efficiency improvements span 1 to 3 MPG based on driving habits. Fine tuning the intake design maximizes benefits in your target area.
Selecting The Right Parts
A cold air intake requires only a few key components. High quality parts withstand engine temperatures and vibrations for long term durability.
Intake Tubing
Aluminum tubing connects the air filter to the engine throttle body. The tubing diameter ranges from 2.5 to 4 inches based on engine size and desired air volume. Larger internal volume improves peak power while a smaller diameter optimizes low end torque.
Air Filter
High flow air filters protect the engine from dirt without restricting airflow. Washable cotton gauze filters provide excellent filtration for a customized fit. Alternatively, an oiled foam filter offers minimal resistance.
Couplers and Clamps
Silicone couplers join all intake components with strong, reliable seals. Stainless steel clamps securely fasten the connections while allowing easy disassembly for filter cleaning.
Mapping The Intake Route
Mapping out the optimal intake path involves balancing cool inlet air temperatures against minimal piping length. Long, winding intakes draw hot engine bay air despite greater filter isolation. The following factors help determine the best positioning.
Air Temperature
Drawing cool external air provides denser inlet air compared to the hot engine bay. Monitor current intake temperatures to determine possible improvements. Consider placing the filter behind the front bumper for temperature reductions up to 20 degrees Fahrenheit.
Tubing Length
Longer tubing routes allow more heat transfer and air turbulence. Limit the piping length to the minimum required for proper airflow. Goal lengths between 10 to 15 inches work well for most vehicles.
Filter Accessibility
Easy access to the air filter simplifies maintenance. Provide sufficient clearance around the filter to remove for cleaning or replacement. Avoid tight bends that restrict hand and tool access.
Custom Intake Construction
With goals defined and parts selected, building the custom cold air intake follows a straightforward process. Proper preparation and precise fabrication ensures optimal performance.
Disassemble Factory Intake
Removing the original intake path prepares for custom intake fabrication. Save any components intended for reuse. Detach all hoses, tubing, and fasteners beginning at the air box. Removing the stock air box and intake tube finishes this step.
Mock Up Intake Route
Test fitting the intake path using cardboard templates or spare tubing prevents rework. Check clearances around piping and filter placement. Alter the design until achieving an optimal layout.
Cut Intake Tubing
Measure piping lengths and mark cuts lines on the aluminum tubing. A tubing cutter or hacksaw makes straight, clean cuts. File any burrs smooth to prevent air turbulence.
Install Silicone Couplers
Slip silicone couplers over the ends of intake tubes. Provide 1 to 2 inches of overlap on both sides for adjustment. Secure with hose clamps but leave loose for final positioning.
Mount Air Filter
Attach the air filter to the intake end using a coupler and clamps. Allow clearance for filter changes without removal. Leave clamps loose until final assembly.
Final Assembly
Align the intake components for best fit and tighten all clamps. Ensure proper clearances and filter access. Inspect all connections for secure, leak-free fit. Reinstall any factory intake components intended for reuse.
Reaping The Benefits
With careful construction and installation, the custom cold air intake improves engine efficiency and power. Properly maintaining the intake ensures lifelong benefits.
Performance Testing
Compare performance before and after the intake upgrade. Timed 0-60 MPH acceleration runs verify any improvement. Professional dynamometer testing provides power and fuel efficiency measurements. Expect to see meaningful gains in both areas.
Ongoing Maintenance
Check intake clamps periodically for proper tightness as tubing can flex slightly over time. Clean the air filter according to manufacturer directions, usually every 20,000 to 30,000 miles depending on conditions. Replacing filters maintains expected performance gains.
Building your own cold air intake saves money over buying a kit while providing a factory level fit. The ability to customize for your specific goals and vehicle makes the project worthwhile. With a custom cold air intake, enjoying increased engine power or efficiency becomes reality.
Can I Make A Custom Cold Air Intake?
Yes, with some basic tools and materials, you can construct a custom cold air intake for your vehicle. This allows you to tailor the intake design specifically for your goals, whether maximizing power or efficiency. Carefully map out the optimal intake route and select high quality parts like aluminum piping, silicone couplers, and a performance air filter.
With proper preparation and fabrication, you can build an effective intake that fits perfectly for your application. Expect to gain horsepower, improve throttle response, and boost fuel economy if done properly.
How Much Hp Will A Cold Air Intake Give You?
The horsepower increase from adding a cold air intake can vary quite a bit based on the vehicle and intake design, but typically ranges from 5 to 15 HP. This gain comes from the denser, cooler air providing more oxygen for better combustion. Shorter, more direct intakes offer less gain than those drawing air from outside the engine bay.
Well-designed systems for turbocharged applications see the largest gains, sometimes over 15 HP. Overall, installing a quality cold air intake is one of the simplest ways to release more power from your engine.
Do You Need A Custom Tune For Cold Air Intake?
Most cold air intakes will work fine with the factory ECU tuning, especially on newer vehicles. Some high performance intakes may require a tune to prevent running too lean. Signs like pinging under hard acceleration point to an overly lean condition.
For mild street performance use, an intake alone is usually sufficient. But pushing big power gains may need customized fueling and timing maps to maximize performance and prevent engine damage.
Can I Use PVC For Air Intake?
PVC is not well suited for intake piping due to its tendency to deform from engine heat and its poor heat resistance. Over time, PVC can warp and possibly come loose. While cheaper, it lacks the durability of aluminum or silicone tubing.
For a flexible, durable cold air intake, aluminum or silicone tubing joined with high quality couplings will withstand engine demands. Any material used must resist temperatures over 200°F to maintain a safe, leak-free system.
Frequently Asked Questions
How Much Horsepower Does A Cold Air Intake Add?
A well-designed cold air intake typically adds 10 to 15 HP on naturally aspirated engines. The denser, cooler air provides more oxygen for better combustion. Results vary based on the vehicle and intake design.
What Are The Benefits Of A Cold Air Intake?
Benefits include increased horsepower, improved throttle response, better fuel efficiency, and an aggressive intake sound. Cooler air is denser and combusts more efficiently than hot inlet air.
Can I Install A Cold Air Intake Myself?
With some mechanical ability, proper tools, and patience, installing a custom intake is doable for a DIY enthusiast. It requires removing factory components, cutting and fitting tubing, and securing clamps and fasteners.
Will A Cold Air Intake Void My Car’s Warranty?
Manufacturers honor warranties unless the intake caused related damage. Improper installation or an overly restrictive filter can contribute to failures. Quality parts and correct sizing help prevent issues.
How Often Should I Clean My Cold Air Intake?
Inspect air filters every 6 months or 5,000 miles at minimum. Frequent full cleanings vary based on environment from 12,000 to 60,000 miles. Check manufacturer guidelines and adjust for driving conditions.
Final Thoughts
Installing a Build A Custom Cold Air Intake taps into your vehicle’s hidden performance potential. The ability to custom tailor the intake for your specific goals makes the project doubly worthwhile. Driving a vehicle with a customized cold air intake proves an enjoyable and rewarding experience.
Also Read: