Installing rear window visors is an easy upgrade that can make your drive more comfortable and enhance the look of your vehicle. Visors not only look great, but they serve the practical purpose of blocking glare and rain. With some simple tools and basic steps, you can add stylish rear window visors to your car or truck.

Benefits Of Rear Window Visors

Rear window visors offer a variety of benefits that make them a popular accessory. Here are some of the top reasons to install visors:

  1. Reduce glare – Visors block sunlight from entering through the rear window, cutting down on glare and eye strain for drivers. This is especially helpful when the sun is low on the horizon in early morning or late afternoon.
  2. Deflect rain – Rear window visors redirect water away from the window, allowing you to crack the window for ventilation without letting in rain.
  3. Enhance appearance – Available in a variety of materials like acrylic or stainless steel, visors add style and accent your vehicle’s looks.
  4. Protect interior – By keeping out rain and sunlight, visors help protect your interior from damage like fading.

What You’ll Need

Installing rear window visors is an easy DIY project if you have the right supplies. Here’s what you’ll need to complete the job:

  1. Rear window visors – Purchase a set designed specifically to fit your make/model of vehicle.
  2. Isopropyl alcohol
  3. Clean microfiber towels
  4. Tape measure
  5. Masking tape (if needed)
  6. Safety razor or blade

Preparation

Proper preparation is key to achieving a clean installation. Follow these steps:

Clean the Window

Thoroughly clean the area where the rear window visors will attach using isopropyl alcohol and microfiber towels. This removes any dirt, oil or grease that could interfere with adhesion.

Check Fit

Test fit each visor before peeling off the adhesive backing. Ensure proper alignment and fit.

Mark Visor Location

Use masking tape to mark the location where the visor will attach. This assists with precise placement.

Prepare the Surface

Wipe the mounting location again just prior to attaching the visors. This removes any remaining dust or debris.

Installation Steps

Follow these instructions to properly install rear window visors:

Peel Backing

Remove a portion of the adhesive backing, about 1-2 inches from the edge. Do not remove the entire backing yet.

Align and Adhere

Carefully align the visor and press the exposed adhesive to the window. Apply pressure to adhere.

Remove Remaining Backing

Once aligned, slowly peel off the remaining adhesive backing while applying pressure to fully adhere the visor.

Conform Visor

Run your hands along the visor surface to conform it to the window curvature and ensure strong adhesion.

Trim Excess

Use a razor blade to trim any excess length that overhangs the edges.

Clean Edges

Wipe away any adhesive residue and clean the visor edges using isopropyl alcohol.

Allow Curing

Let the adhesive fully cure for 24-48 hours before washing or applying heavy pressure to the visors.

How Do You Put Back Wind Deflectors In?

Wind deflectors are a great way to promote airflow when driving with the windows down. To reinstall wind deflectors, start by cleaning the window frames with rubbing alcohol where the deflectors will attach. Make sure the rubber seals are properly seated in the window channel too. 

Slowly peel back the adhesive backing on the deflectors, align them in the correct position, and press firmly to adhere them to the windows. Run your hand along the deflectors to conform them to the shape of the window. Finally, allow 24 hours for the adhesive to fully cure before driving. Proper reinstallation ensures the deflectors seal tightly for optimal airflow control when driving.

How Do You Install A Rain Visor With A Clip?

Rain visors with clips provide a quick and easy way to install a visor without adhesive. Start by lowering the window and thoroughly cleaning the area where the visor will attach. Open the clips on the visor and position the visor properly on the window frame. 

Press the clips onto the top part of the glass to grip securely. Slowly raise the window to fit snugly into the visor clips. Check that the visor is level and adjust as needed. Make sure no part of the window edges overlap the visor. 

Finally, inspect the clips to ensure they have a tight grip on the glass. The visor clips allow quick installation and removal while keeping rain out when windows are open.

How Do You Install A Rain Shield?

Installing a rain shield helps prevent water from entering the window when it’s cracked open. First, clean the window frame where the shield will adhere using alcohol. Peel back the adhesive tape and align the rain shield in position on the window. Press gently but firmly across the surface to secure the adhesive backing. 

Use a blunt tool to push the shield around the mirror mount or other protrusions for a tight seal. Trim any excess length with scissors. Make sure the rain shield sits flush and allows the window to close properly. 

Allow 48 hours curing time before washing the car or putting pressure on the shield. Proper installation ensures it deflects rain away while allowing fresh air circulation.

How Do Window Visors Work?

Window visors are designed to allow windows to stay partially open during inclement weather. They attach above the window to redirect water and wind deflection when the window is cracked. Visors have a lip that protrudes out slightly to catch and drain water away from the opening. 

They also streamline airflow over the window gap, preventing excessive wind buffeting. Quality visors are made from sturdy acrylic or metal and tinted to block glare. The airflow allows ventilation without getting the interior wet. 

Visors work best when installed properly to seal out moisture. Overall, they provide fresh air circulation and prevent misting while keeping the majority of rain and wind outside.

Tips for Proper Installation

Follow these tips for best practices when installing rear window visors:

  1. Perform installation in a warm indoor area at room temperature. Cold conditions can impact adhesive effectiveness.
  2. Avoid installing in direct sunlight. Excessive heat can hinder proper application.
  3. Take care not to bend or crease the visors during installation. Gently handle the edges.
  4. Apply even pressure across the entire surface to create a strong seal with the window.
  5. If repositioning is needed during installation, heat with a hairdryer to soften adhesive and gently lift.

Maintaining Your Rear Window Visors

Once installed, follow these guidelines to keep your rear window visors looking their best:

  1. Use only mild soap and water to clean. Avoid harsh chemicals or abrasive cloths.
  2. Inspect visors periodically for any loosening or damage. Reapply adhesive if needed.
  3. Avoid using scrapers, squeegees or high-pressure sprayers near the visors when washing your vehicle.
  4. Touch up any scratches to prevent corrosion by using automotive touch-up paint.
  5. Replace damaged visors promptly to maintain functionality and appearance.

DIY vs Professional Installation

Installing rear window visors yourself can save money compared to professional installation. However, for some vehicles, it can be challenging to access the rear window location. Here are some pros and cons of each option:

DIY Installation

Pros

  1. More affordable option
  2. Convenient to do at your own pace
  3. Satisfaction of completing project yourself

Cons

  1. Requires tools and supplies
  2. Limited access for some vehicles
  3. Potential for uneven alignment/application

Professional Installation

Pros

  1. Expert attachment and alignment
  2. Lift access for hard-to-reach spots
  3. Warranties from reputable shops

Cons

  1. Added cost for labor
  2. Inconvenience of appointment scheduling
  3. Risk of damage from inexperienced installers

Also Read: How To Fix Scratch On A Steering Wheel?

Conclusion

Adding rear window visors is an easy upgrade that provides functionality and style. With proper preparation and careful application, you can install visors yourself and save on cost. Or, have them professionally installed for convenience and precision alignment. Either way, visors are great accessories that boost the look of any vehicle while providing useful benefits. With some simple tools and these step-by-step instructions, you’ll be driving in style with new rear window visors in no time.