The Honda Accord is a reliable and sturdy car that has been on the roads for decades. However, like any other car, it may encounter some issues, one of which is the Auxiliary Switch not working. If you’re experiencing this problem with your Honda Accord, don’t worry. It’s a fairly common problem with a straightforward solution.
In this article, we’ll show you how to repair the Honda Accord Auxiliary Switch in just a few simple steps.
How To Repair When Honda Accord Aux Not Working?
- Purchase The Correct Part
- Remove The Center Console
- Remove The Old Auxiliary Switch
- Install The New Auxiliary Switch
- Reinstall The Center Console
Purchase The Correct Part
The first step in repairing your Honda Accord’s auxiliary switch is to purchase the correct part. The part number for the auxiliary switch is 39112-SDA-A03.To purchase the component, you can do so at the Honda dealership in your neighborhood or at an auto parts store. The cost of the part is usually around $15.
Remove The Center Console
The auxiliary switch is located in the center console, so you’ll need to remove it to access the switch.You are going to need a trim remover or a pry tool in order to accomplish this. To begin, work the pry tool around the perimeter of the center console until it becomes loose enough to be removed.
This should be a fairly simple task, and there is no reason for you to be concerned about causing damage to the center console in the process.
Remove The Old Auxiliary Switch
Once you have removed the center console, you should see the old auxiliary switch. To remove it, gently wiggle it until it pops out. To assist you in releasing it, you might require the assistance of a small tool like a screwdriver.
Install The New Auxiliary Switch
With the old auxiliary switch removed, it’s time to install the new one. Simply insert the new switch into the center console and push it into place. It should snap into place easily, and you shouldn’t have to use any tools.
Reinstall The Center Console
Once the new auxiliary switch is in place, it’s time to reinstall the center console. To do this, simply align the tabs on the center console with the corresponding holes in the car and push it back into place. You may need to use a little bit of force to get it to snap back into place, but it shouldn’t be difficult.
You can also watch a youtube video on Honda accord aux not working:
How To Connect AUX To A 2009 Honda Accord?
To connect your AUX to a 2009 Honda Accord, look for the auxiliary input jack located inside the center console compartment. This input jack accepts audio input from standard accessories. To begin, ensure that your audio device, such as a smartphone or MP3 player, has a compatible AUX output, such as a 3.5mm headphone jack or a compatible adapter. Then, make sure you have a working 3.5mm AUX cable, as a faulty cable can cause problems. If you have any doubts about the cable’s functionality, try it with other devices.
Connect one end of the AUX cable to your audio device’s headphone jack or adapter, and the other end to the center console’s auxiliary input jack. Turn on your car’s audio system and select the AUX mode or source using the car’s stereo controls. After you’ve properly connected and configured everything, you should be able to play audio from your device through your car’s speakers, and you can adjust the volume on both your device and the car’s stereo as needed.
Does A 2008 Honda Accord Have An AUX Input?
Yes, an AUX input is available on a 2008 Honda Accord. The auxiliary input is typically found in the center console, near a power outlet. This input is intended to accept standard audio accessories such as smartphones and MP3 players, making it simple to connect external audio devices to your vehicle’s audio system.
Why Is My AUX Cord Not Working On My Phone?
If your AUX cord isn’t working with your phone, there are a few steps you can take to troubleshoot the problem. Try a different AUX cable first, as the problem could be with the cable itself. Testing with a different cable can help determine whether the original cable is defective. If the new cable works, the issue may be with the original cable.
In addition, try your phone with another audio source that accepts AUX input. If the phone works with another device via the same AUX cable, the issue could be with your car’s radio. If it doesn’t work with the second device, there could be a problem with your phone’s headphone jack or settings.
Why Is My AUX Cord Not Working in My Car?
If your car’s AUX cord isn’t working, there are several steps you can take to diagnose and resolve the problem. First and foremost, ensure that your car’s audio system and the AUX cord are compatible. Certain cords may be incompatible with certain vehicles, or the cord itself may be damaged.
To troubleshoot, connect your AUX cord to your car’s audio system using a different adapter. If this doesn’t work, consider purchasing a new AUX cable, as these cables can wear out or become damaged over time.
Does A 2008 Honda Accord Have Bluetooth Or AUX?
In most cases, a 2008 Honda Accord lacks built-in Bluetooth functionality for wireless audio streaming. It does, however, have an AUX input for connecting external audio devices such as smartphones or MP3 players. A compatible AUX cable is used to make this connection. While Bluetooth may not be available, the AUX input allows you to listen to music through your car’s audio system, providing a direct and reliable connection.
Conclusion
Repairing the 2008 Honda Accord stereo auxiliary switch is a straightforward process that can be completed by anyone with basic mechanical skills and the right tools. If you need further assistance, feel free to reach out to a professional mechanic.
Also Read:
- Honda Accord Traction Control Won’t Turn Off
- 2018 Honda Accord Multiple Warning Lights
- Honda Accord A14 Service Cost
- Honda Accord Lug Nut Torque
