Honda Civic Wiper Blade Sizes – A Complete Guide

The Honda Civic is one of the most popular and longest-running car models in automotive history. Since its introduction in 1972, over 27.5 million Civics have been sold worldwide. With so many Civics on the road, it’s important for owners to know the proper Honda Civic Wiper Blade Sizes to keep their windshields clear.

Wiper blades are often overlooked but are a vital safety component, especially when driving in inclement weather. Ill-fitting or worn blades can severely reduce visibility, putting you and others at risk. This article will cover the blade sizes for all Civic models and years, so you can easily find the right replacement blades. We’ll also discuss symptoms of worn blades and how to change them.

Are There Different Sizes Of Wiper Blades?

Wiper blade sizes vary by vehicle make and model. The blade needs to perfectly fit the curvature of the windshield to maximize contact and wiping capability.

Honda Civic Wiper Blade Sizes range from as small as 14” up to 28”, depending on the model year and whether it is a driver or passenger side blade. Generally, the driver’s side blade is larger since the windshield area it must clear is bigger.

Always consult your owner’s manual when replacing blades to ensure you get the exact right fit. Using the wrong size can lead to skipping, streaking and reduced visibility.

Wiper Blade Sizes By Side

The side of the car – driver vs. passenger – is the primary factor determining Honda Civic Wiper Blade Sizes:

  • Driver’s side: From 20″ to 28″
  • Passenger side: From 16″ to 25″
  • Front side: From 14″ to 18″
  • Rear side: From 12″ to 18″
Honda Civic Wiper Blade
Honda Civic Wiper Blade

As you can see, there is considerable variance depending on the side of the Civic. Driver’s blades are typically larger to clear the extra surface area on that side. Here is a helpful table summarizing the size ranges:

Side
Size Range
Driver side
20′′–28′′
Passenger Side
16′′–25′′
Front side
14′′–18′′
Rear side
12′′–18′′

Always double check your owner’s manual or the old blades themselves before getting new ones.

Honda Civic Wiper Blade Sizes By Year

Now, let’s look at the specific Honda Civic wiper blade sizes required through the years:

2022 Honda Civic

The latest 2022 Civic requires a 24-inch driver’s blade and 19-inch passenger blade.

2016-2021 Honda Civic

These model years need a 26-inch driver’s blade and 18-inch passenger blade.

2012-2015 Honda Civic

Drivers have options for this generation Civic. Acceptable driver’s side blades are 26 or 28 inches, while the passenger side takes 22 or 24 inch blades.

2008-2011 Honda Civic

Like the previous generation, 2008-2011 Civics use 26 or 28 inch driver blades. Passenger side has more variety at 22, 24, or 25 inches.

2006-2007 Honda Civic

These Civics take a 28 inch driver blade and 24 or 25 inch passenger side.

2002-2005 Honda Civic

More variety emerges in this era, with the driver’s side using 21 or 24 inch and passengers taking 16 or 19 inch. A 12 inch rear blade is also required.

2001 Honda Civic

The 2001 Civic saw 21 inch driver and 19 inch passenger blades.

1999-2000 Honda Civic

These models returned to matched pairs with 20 inch driver and passenger sides.

1996-1998 Honda Civic

An identical 20 inch driver and passenger combination was used here as well. A 14 or 15 inch rear blade was introduced.

1992-1995 Honda Civic

These Civics took 22 inch driver and 18 inch passenger blades.

1988-1991 Honda Civic

Wiper sizes were 20 inch driver, 19 inch passenger, and 16 inch rear for these model year Civics.

1987 Honda Civic

The 1987 Civic had unique front wiper coverage with 18 inch blades on both sides. The rear adopted a 16 or 18 inch wiper.

1984-1986 Honda Civic

These years also shared 18 inch blades for both front sides. The rear saw 14, 15, 16, or 18 inch options.

1980-1983 Honda Civic

Early ’80s Civics took 16 inch front blades and 13 inch rear blades.

1973-1979 Honda Civic

The first generation Civic had 14 or 15 inch front wipers. No rear wiper was used.

How To Change Windshield Wiper Blades In A Honda Civic?

Replacing the windshield wiper blades on your Honda Civic is an easy process that you can complete in under 10 minutes. Just follow these detailed steps:

  • Purchase The Correct Replacement Wiper Blades
  • Lift The Wiper Arms Off The Windshield
  • Locate The Attachment Clip
  • Press And Hold The Attachment Clip
  • Remove The Old Wiper Blades
  • Install The New Wiper Blades
  • Lower The Wiper Arms Onto The Windshield
  • Turn On The Wipers And Verify Performance
Honda Civic Wiper Blade Sizes
Honda Civic Wiper Blade Sizes

Purchase The Correct Replacement Wiper Blades

The first step is to buy new wiper blades that are the right sizes for your particular Civic model and year. Consult your owner’s manual or the size charts in this article to find the correct blade lengths for the driver and passenger sides. Only use genuine Honda blades or blades from a reputable brand to ensure proper fit and quality.

Lift The Wiper Arms Off The Windshield

Once you have the new blades, go out to your Civic. Make sure the car is completely turned off before proceeding. Engage the wiper switch to lift the wiper arms into the service position, fully up and away from the windshield. This gives you access to change the blades.

Locate The Attachment Clip

Examine where the wiper blade connects to the wiper arm. There will be a small plastic attachment clip or tab that locks the blade firmly in place.

Press And Hold The Attachment Clip

Using your thumb, press down on the plastic attachment clip. This disengages the hook from the wiper arm. While pressing, slide the blade down toward the base of the arm to release it. Hold onto the wiper blade as it detaches so it doesn’t fall onto the windshield.

Remove The Old Wiper Blades

With the wiper blades detached, you can now fully remove the old blades from the wiper arms. Make sure you grab both the driver and passenger blade assemblies. Dispose of or recycle the old rubber blades appropriately.

Install The New Wiper Blades

Take your new replacement Honda Civic wiper blades and slide them into place on the wiper arm until you hear the attachment clip make a “click” locking noise. Ensure the blade is firmly connected by trying to pull down on it. There should be no give if it’s properly secured.

Lower The Wiper Arms Onto The Windshield

With the fresh wiper blades installed, gently lower the wiper arms back down onto the windshield. Make sure they rest flat against the glass.

Turn On The Wipers And Verify Performance

Get into your Civic and turn the key to the “on” position. Toggle the wipers on and visually inspect them as they wipe. Ensure they are making full, consistent contact with no skipped spots or streaking.

And that’s it – you have successfully completed the entire Honda Civic windshield wiper blade replacement process. Taking a few minutes to install new blades can make a huge difference in visibility and safety.

How Do I Know When My Windshield Wipers Need Replacing?

It’s important to regularly inspect your Honda Civic wiper blades for signs of wear and damage. Here are some telltale symptoms that mean it’s time for new blades:

  • Cracking/splitting – Once the rubber starts cracking or splitting, blade performance quickly deteriorates
  • Streaking – If blades aren’t making full contact with the windshield, they’ll leave streaks and reduce visibility
  • Squeaking/chattering – Friction from worn rubber causes unpleasant noises while wiping
  • Skip areas – Damaged blades may completely miss wiping certain spots
  • Loose attachment – Make sure blades are securely attached to the wiper arm.

Don’t wait until blades are completely ineffective before replacing them. At the first sign of deterioration, install new Honda Civic Wiper Blades for optimal safety.

The Importance Of Proper Wiper Blade Fit

Having the right wiper blade size is crucial for maintaining visibility and safety in adverse weather. Ill-fitting blades can leave gaps and streaks on the windshield.

Honda Civic blades come in a wide range of sizes depending on model year and side of vehicle. Consulting the size charts in this guide prevents getting the wrong blades.

Properly sized wiper blades allow for full sweeping clearance across the entire windshield. This gives you best possible driving visibility in rain, snow, and sleet.

Take a few minutes to look up the specs for your Civic and get the exact match. Your driving safety in hazardous conditions depends on it!

Frequently Asked Questions

How Often Should I Replace My Honda Civic’s Wiper Blades?

You should inspect blades at least every six months. Plan on replacing them at least once a year, or more often if you experience signs of deterioration.

Where Can I Buy Replacement Honda Civic Wiper Blades?

Replacement blades are widely available at auto parts stores, Honda dealerships, and online retailers like Amazon. Make sure you get the exact right fit.

Do Driver And Passenger Blades Need To Be Replaced Together?

It’s recommended to replace both sets together even if only one side is worn. This ensures optimal visibility and consistency.

What’s The Best Brand Of Replacement Blade For My Civic?

Honda recommends using Genuine Honda wiper blades as they’re engineered to perfectly fit your Civic. But brands like Bosch also make quality blades.

How Can I Make My New Wiper Blades Last Longer?

Avoid using blades to clear ice or snow from the windshield, as this can damage the rubber. Also be sure to regularly clean blades with soapy water

Conclusion

The wiper blades on your Honda Civic are a small but vital component. Having properly fitting blades dramatically impacts visibility and driving safety in wet weather.

Use this comprehensive guide to look up the correct OEM blade sizes for your Civic model year and side of vehicle. Be sure to change blades annually or when wear/damage is noticed.

Equipping your Honda Civic with the right wiper blades takes just minutes but pays dividends every time you drive in the rain. Stay safe on the road by getting the perfect fit for your windshield.

Also Read:


Author's Image

Ammar Masoud

I have had a long and fulfilling career in the automotive industry, primarily with Honda and Acura. With 15 years of experience as a Honda service technician, I became highly skilled in repair and maintenance, gaining a deep understanding of these vehicles. After many years in the automotive field, I decided to embark on a second career in industrial manufacturing. It was a significant change, but I found that the skills I had honed in the automotive industry were incredibly valuable in my new role. In my current position in industrial manufacturing, the demand for quality workmanship and meticulous attention to detail is paramount. Fortunately, these are traits that I have cultivated throughout my years in the automotive industry. I take pride in applying these skills to meet the high standards expected in the manufacturing sector.