What Size Wiper Blades For 2010 Honda Civic?

The 2010 Honda Civic wiper blade size differs between the driver and passenger sides. The driver’s side requires a 26 inch wiper blade, while the passenger side needs a 22 inch wiper blade. Knowing the proper blade sizes for replacement is important to ensure proper wiping coverage and visibility. Wiper blades should be replaced every 6-12 months or when cracking, streaking or chattering occurs.

Driver’s Side Wiper Blade

The driver’s side wiper blade on the 2010 Honda Civic sedan should be 26 inches long. This length provides the correct wipe pattern to clear water, snow and debris from the driver’s field of vision.

When purchasing new wiper blades, be sure to search for a 26 inch blade specifically designed for the 2010 Honda Civic. Many manufacturers make direct replacement blades the proper length and connector type.

Using the wrong size blade can lead to reduced visibility from wiped areas being missed by a blade that is too short. A blade that is too long may streak and chatter. Always double check that you have the 26 inch blade before installing on the driver’s side.

Passenger Side Wiper Blade

While the driver’s side requires a 26 inch wiper blade, the passenger side needs a shorter 22 inch blade.

The shorter length accounts for the smaller swept area on the passenger side. Using a longer 26 inch blade on this side could cause streaking, chatter and excessive wear.

When buying new wiper blades, pay close attention to ordering a 22 inch blade for the proper fit and wipe pattern on the passenger side.

As with the driver’s side, specifically search for replacement blades made for the 2010 Honda Civic in 22 inch size.

Recommended Replacement Frequency

Wiper blades are made of rubber and graphite coatings that deteriorate over time. Sun, heat, cold weather and debris all contribute to the breakdown of the rubber wiping edge.

Most manufacturers recommend replacing wiper blades every 6 months to 1 year. However, it’s best to inspect blades more frequently for signs of wear and damage. If cracking, streaking, smearing or chatter occur, new blades should be installed right away.

What Size Windshield Wipers 2014 Honda Civic
What Size Windshield Wipers 2014 Honda Civic

Wiper blades are an important safety component that help maintain visibility in rain, snow and wet conditions. Take time to periodically inspect them and keep your 2010 Honda Civic stocked with a fresh set.

Signs You Need New Wiper Blades

Here are some common signs that indicate your 2010 Honda Civics wiper blades need to be replaced:

  1. Streaking on the windshield
  2. Chattering or skipping across the glass
  3. Smearing dirt or debris across the windshield
  4. Fraying or tearing of the wiper rubber material
  5. Exposure of the wiper metal frame from wearing down the rubber wiping part

Any of these signs mean that the wiper blades are no longer effectively clearing water and debris from your windshield. New blades in the proper 2010 Honda Civic wiper blade size should be installed.

How to Measure Wiper Blade Size

If you need to measure the wiper blades to identify the correct replacement size, follow these steps:

  1. Lift the wiper arm off the windshield.
  2. Extend the wiper blade out to its full length.
  3. Measure from the base of the wiper where it connects to the arm all the way to the end of the blade.
  4. Round the measurement to the nearest inch.

Be sure to measure both the driver and passenger side separately, as the sizes differ. Refer to the measurement when shopping for new blades specifically for your 2010 Honda Civic.

Where to Buy Replacement Blades

Replacement wiper blades for your 2010 Honda Civic can be purchased:

  1. Online at Amazon, AutoZone, Walmart, PepBoys and other retailers
  2. At your local auto parts chain store like AutoZone, AdvanceAuto, O’Reilly Auto Parts. Call ahead to check blade sizes in stock for your vehicle.
  3. At the Honda dealer parts counter
Honda Civic Wiper Blade Sizes
Honda Civic Wiper Blade Sizes

Prices can range from $10 on sale up to $50 for premium blades. Avoid no-name cheap blades that may not properly fit or perform well. Most drivers can replace wiper blades themselves, but you can also have them installed at oil change shops and mechanics.

Blade Size
Location
26 inches
Driver Side
22 inches
Passenger Side

Using the correct 2010 Honda Civic wiper blade size is important for visibility and safety. Follow the recommendations to replace blades annually or when wear is noticed. Always double check new blades for proper fit. Properly maintained wiper blades help provide clear windshield vision in all weather conditions.

Conclusion

Choosing the right wiper blade size is crucial for safe driving visibility. The 2010 Honda Civic sedan uses a 26 inch blade on the driver’s side and a 22 inch blade on the passenger side. Checking and replacing blades annually, or when signs of wear appear, helps ensure optimal windshield clearing and visibility.

Using the manufacturer recommended sizes avoids streaking, chatter and wiped areas being missed. Investing in quality blades specifically for your 2010 Civic helps maintain proper wipe patterns and driver visibility in rain, snow and wet weather.

Also Read:


Author's Image

Ammar Masoud

I have had a long and fulfilling career in the automotive industry, primarily with Honda and Acura. With 15 years of experience as a Honda service technician, I became highly skilled in repair and maintenance, gaining a deep understanding of these vehicles. After many years in the automotive field, I decided to embark on a second career in industrial manufacturing. It was a significant change, but I found that the skills I had honed in the automotive industry were incredibly valuable in my new role. In my current position in industrial manufacturing, the demand for quality workmanship and meticulous attention to detail is paramount. Fortunately, these are traits that I have cultivated throughout my years in the automotive industry. I take pride in applying these skills to meet the high standards expected in the manufacturing sector.