Honda Accord Screen Not Working – A Comprehensive Troubleshooting Guide

A wiring or fuse problem is the most common cause of a broken Honda Accord screen. Often, checking connections and replacing fuses will solve the problem.

It can be aggravating to have an unresponsive touchscreen or display in your Honda Accord. However, there are several troubleshooting steps you can take on your own to diagnose and repair the problem before paying for an expensive dealership visit. This comprehensive guide will investigate the various Honda Accord screen not working scenarios and offer actionable solutions to get your system back up and running.

Why Is My Honda Accord Screen Not Working?

There are a few key reasons why your Honda Accord screen may have stopped functioning properly:

  • Faulty wiring connections
  • Blown fuse
  • Software glitch
  • Faulty screen

Faulty wiring connections

Screens, like any other electronic component, require proper electrical connections to turn on and transmit data. If a wire becomes loose or damaged, power can be disrupted, causing the screen to malfunction or shut down completely.

Blown fuse

In your Honda Accord, fuses protect the screen, radio, and other electronics. When a fuse blows, the power to that component is cut off. Checking and replacing fuses is a good place to start when troubleshooting.

Software glitch

Vehicles today have sophisticated infotainment systems that are essentially small computers. They, like any other computer, can experience random glitches and lockups, resulting in frozen or black screens. Rebooting the system frequently resolves software problems.

Why Is My Honda Accord Screen Not Working
Why Is My Honda Accord Screen Not Working

Faulty screen

If your Accord’s screen is cracked, has visual artifacts, or shows other signs of hardware failure, the screen itself may need replacement. This is a more involved fix best left to professional technicians.

Step-By-Step Troubleshooting For Honda Accord Screens

Before you panic about an expensive trip to the dealership, there are several DIY troubleshooting steps you can take:

Check for Loose Wiring Connections

The first thing to look for is any obvious wiring issues that may be contributing to the problem. Look for any loose plugs or damaged cables around the screen and radio/infotainment system along the dash and center console. Reconnect anything that appears to be disconnected or frayed.

Inspect All Related Fuses

The fuse box should be located under the dash or in the engine bay, according to your owner’s manual. Find the fuses for the infotainment system and screen display. Take them out one at a time and inspect them for any that have blown. Replace any blown fuses with equivalent amperage ones.

Reset the Infotainment System

If no problems with the wiring or fuses are discovered, try resetting the infotainment system. Locate the reset button near the screen and hold it for 10 seconds or more until the system reboots. This will reset the software and usually resolve any glitches.

Disconnect and Reconnect Battery

As a last resort, disconnect the negative battery cable for a few minutes to reset all electronic systems. Reconnect the battery and test screen. If the problem persists, there may be an internal hardware failure requiring professional service.

Common Honda Accord Screen Problems And Solutions

Below are some specific problems Honda Accord owners often encounter with malfunctioning screens and radios:

Problem: Radio On, But Screen is Black/Off

Solution: Check fuse #10 in the interior fuse box, which protects the screen. If blown, replace it with a 7.5-amp fuse. Also, inspect wiring plugs behind the screen for loose connections.

Problem: Touchscreen Unresponsive

Solution: Perform a system reboot by holding the power button for 10+ seconds. If the touchscreen is still not responding, disconnect the battery to reset the system.

How Do You Reset The Screen On A Honda Accord
How Do You Reset The Screen On A Honda Accord

Problem: Screen Freezes Up

Solution: Try rebooting the infotainment system. If freeze-ups persist, disconnect the battery to do a hard reset. Frozen screens are often a software glitch.

Problem: Display Image Distorted or Has Lines

Solution: This often indicates an internal hardware problem with the screen itself. Have the unit inspected and replaced by a qualified technician.

How Do You Reset The Screen On A Honda Accord?

Holding down the power button on the infotainment system for 10-15 seconds until the screen goes black is the best way to reset or reboot the screen on a Honda Accord. This causes a forced reboot. Wait a few minutes for the system to restart. 

If that fails, you can perform a hard reset by disconnecting the negative battery cable for 3-5 minutes. This will restart the entire system. Reconnect the cable and test the screen.

How Do You Fix A Black Screen On A 2017 Honda Accord?

A blown fuse or a wiring issue is most likely to blame for a black screen on a 2017 Honda Accord. First, inspect and replace the #10 fuse in the interior fuse box. Inspect the connections behind the screen for any loose plugs as well. 

Disconnect and reconnect the battery as a last resort to perform a hard reset of the electronics. If the screen remains black, there may be an internal problem that necessitates professional service and possibly replacement.

How Do You Reset The Screen On A Honda Accord 2023?

To reset the screen on a 2023 Honda Accord, hold down the power button on the infotainment system for 10+ seconds until the screen goes completely black. This will initiate a reboot. If that does not work, locate the small pinhole reset button near the screen and press that in with a paperclip. Holding it for 4-5 seconds will force a factory reset. Wait several minutes for the system to reboot.

Why Is My CarPlay Not Working In Honda Accord?

If CarPlay is not working in your Honda Accord, first check that cables are securely connected to both devices, and try unpairing and repairing the phone’s Bluetooth connection. Also, update your iOS software, toggle airplane mode, and reboot your phone. 

As a last resort, reset the Accord’s infotainment system by holding the power button. This often resolves CarPlay connectivity issues.

Protect Your Investment with Proper Maintenance

Your Honda Accord’s advanced infotainment system and touchscreen represent a significant investment. While all electronics can eventually fail, you can maximize their lifespan with proper care and maintenance:

  1. Keep the interior clean: Dust build-up and spills can damage electronic components over time. Vacuum regularly and wipe down surfaces.
  2. Inspect wiring connections: Periodically check that wiring plugs are securely connected and free of corrosion or damage.
  3. Update software: Ensure your Honda’s software is updated to the latest version for optimal performance. Updates often fix glitches.
  4. Use a sunshade: Protect the screen from interior heat damage by using a fitted sunshade on hot, sunny days.

Recommended Articles:

Author's Image

Ammar Masoud

I have had a long and fulfilling career in the automotive industry, primarily with Honda and Acura. With 15 years of experience as a Honda service technician, I became highly skilled in repair and maintenance, gaining a deep understanding of these vehicles. After many years in the automotive field, I decided to embark on a second career in industrial manufacturing. It was a significant change, but I found that the skills I had honed in the automotive industry were incredibly valuable in my new role. In my current position in industrial manufacturing, the demand for quality workmanship and meticulous attention to detail is paramount. Fortunately, these are traits that I have cultivated throughout my years in the automotive industry. I take pride in applying these skills to meet the high standards expected in the manufacturing sector.