How To Safely Jack Up Honda Accord Using Proper Jack Points?

The Honda Accord’s front and rear jack points are specially designed lifting points that allow you to safely jack up your vehicle. Knowing how to use the correct jack points is essential for changing a tire or performing under car maintenance without causing damage.

Changing a flat tire or changing the oil in a Honda Accord necessitates jacking the vehicle up to gain access underneath. Using the incorrect jack points puts the underbody at risk of damage if the jack slips. Use this guide to figure out where to put jack stands and floor jacks on your Honda Accord.

Finding The Jack Points On A Honda Accord

The Honda Accord has specific jack points that need to be used when lifting the vehicle. Improperly jacking up your Accord can lead to damage and serious safety hazards.

Here are the designated jack points on this popular sedan:

  1. Front Jack Points
  2. Rear Jack Points
  3. Emergency Jack Points

Front Jack Points

A jack point is located behind each front wheel. Honda reinforced these areas to allow the Accord to be lifted safely from the front.

When raising the front of the vehicle, the front jack points are the best places to position your jack stand. When lifting, make sure the jack pad makes full contact with the jack point.

Rear Jack Points

A jack point is located behind each rear wheel well, just like the front. The rear jack points allow you to securely lift the rear of the Accord.

When jacking up the back of the vehicle, always use the designated rear jack points. Never attempt to lift the Accord from any other rear location.

Emergency Jack Points

Honda equipped the Accord with emergency jack points in addition to the main jack points behind the wheels.

If the normal front points are not accessible, there is an emergency jack point under the front bumper that can be used. A jack point is also located on the rear tow hook.

While not ideal, the emergency jack points enable you to safely lift the car in an emergency. Once the tire is changed, make sure to reposition to the standard points.

How To Safely Lift Your Honda Accord?

Now that you know where the jack points are on your Accord, let’s review the proper jacking procedure. Take your time and focus on safety.

  • Position the Vehicle on Flat Ground
  • Chock Tires
  • Locate Jack Points
  • Position Jack
  • Lift Vehicle
  • Support with Jack Stands
  • Inspect Lift Points
How To Safely Lift Your Honda Accord
How To Safely Lift Your Honda Accord

Position the Vehicle on Flat Ground

Finding a safe location on level, hard ground is the first step. A garage floor or a driveway would be ideal. Concrete offers the most stable foundation.

Make sure no one is in the vicinity of the lift. You need plenty of space to move around without being obstructed.

Chock Tires

With the Accord parked, place wheel chocks on the tires diagonal from the ones you are lifting.

For example, if jacking up the front driver side, chock the rear passenger side tire. The chocks will prevent accidental vehicle movement.

Locate Jack Points

Get down and visually identify the jack points behind the wheels you are lifting. Make sure to use the designated points only.

Some models have a molded jack point, while others show outlines. Consult your owner’s manual if you have any trouble locating them.

Position Jack

Place the jack underneath the Accord, aligning it exactly with the jack point. Keep your body parts away from underneath during this step.

For the front points, position the jack perpendicular to the car. Use the saddle-style lifting point on a bottle jack.

Lift Vehicle

Pump the jack, raising the Accord high enough to insert jack stands or remove the tire. Go slowly to maintain complete control.

Watch that the vehicle lifts uniformly and stays balanced. Stop if you see or hear any problems.

Support with Jack Stands

With the Accord lifted, place the jack stands directly under the body’s frame rails. Align them with where the jack point transferred the weight.

Leave the jack in place as backup support. If using ramps, make sure they are stable. Lower jack.

Inspect Lift Points

Before going under the Honda, inspect the jack and jack stand contact points. Make sure the weight is completely supported.

Check for any slipping or instability in the lifting equipment. Tires should have no contact with the ground.

Where Is The Jack Located In A Honda Accord?

In a Honda Accord, the factory jack is kept in the trunk, often hidden behind a cover on the driver’s side. It will be near the rear wheel on sedans, well tucked into a foam bracket. The jack is vertically mounted further back along the trunk wall on coupes. 

Jack Points Honda Accord
Jack Points Honda Accord

The jack handle and lug wrench are clipped to the jack. After use, make sure to return all pieces to their proper location. Because the Accord’s scissor or hydraulic bottle jack has a limited lifting range, many owners opt for a more robust aftermarket floor jack to aid in tire changes and maintenance.

How Do You Jack Up A 2008 Honda Accord?

Begin by securing the back wheels and applying the parking brake. Using the owner’s manual as a guide, locate the designated jack points behind the front wheels. Place the jack beneath the front cross member, with the saddle aligned with the passenger side point. Smoothly pump the jack to raise the car high enough to remove the flat tire. 

Lower the jack until it is supported by a sturdy jack stand slid under the body frame rail where it meets the jack point. While changing the tire, keep the jack in place as a backup. Reinstall the wheel after tightening the lug nuts to the specified torque. Before removing the jack and stands, carefully lower the car to the ground.

Where To Jack Up A 2004 Honda Accord?

There are front jack points behind each front wheel and rear jack points behind the rear wheels on the 2004 Accord. The reinforced areas behind the front tires within the pinch weld frame rail are the best places to jack up the entire front of the car. Install jack stands under the front jack points on both sides after aligning your quality floor jack beneath the front cross member. 

Check that all lifting equipment is in good working order and is rated for the weight of the Accord. Chock the rear wheels and uniformly jack up the front. When working beneath a lifted vehicle, take all necessary safety precautions.

Where Do You Put Jack Points?

Jack points are reinforced areas on the underside of a vehicle that are designed to support weight when safely lifted. The jack points on most cars are located behind the front and rear wheels, within the pinch weld frame areas. They are located on the solid rear axle of some trucks. 

Check your vehicle’s owner’s manual for the designated lifting points. When raising your vehicle, make sure the jack saddle fully contacts the appropriate jack point. Improper lifting can cause underbody damage.

Where Can I Place Jack Stands?

Jack stands should be installed directly beneath the body frame rails, aligning with the jack points that bear the weight. This is the frame pinch weld behind the front wheels and often in front of the rear wheels on most unibody cars. Use reinforced jack stands with a wide base rated for the cargo of your vehicle. 

Adjust the height so that the jack stand saddles make contact with the jack points once the vehicle is lifted. Before lowering the jack, make sure the stands are solid and stable. When going under a lifted vehicle, never rely solely on a hydraulic jack.

Are Car Jacks Safe?

When used properly on a solid, level surface, car jacks are generally safe. Check that the jack is in good working order and is rated for the weight of your vehicle. Follow the jack’s instructions carefully and lift the car only at the designated jack points. Raise the vehicle slowly, keeping an eye out for any instability, and don’t get under it without jack stands. 

Never use a bumper jack that makes contact with the bumper. While hydraulic and scissor jacks allow for controlled lifting, a jack stand is required when working beneath the vehicle. Always use safety precautions such as choking wheels and never rush through the lifting process.


Lifting a Honda Accord correctly is crucial for safe undercar access. Use quality floor jacks and stands along with the vehicle’s built-in jack points instead of improvising lift spots. Chock tires, lift on flat ground, and support fully with jack stands.

Locating the front and rear jack points, preparing with all equipment, and carefully lifting your Accord will lead to success and prevent vehicle damage or accidents. Use this guide as a reference for your lifting jobs, and work smart under your Honda.

Also Read:

Author's Image

Ammar Masoud

I have had a long and fulfilling career in the automotive industry, primarily with Honda and Acura. With 15 years of experience as a Honda service technician, I became highly skilled in repair and maintenance, gaining a deep understanding of these vehicles. After many years in the automotive field, I decided to embark on a second career in industrial manufacturing. It was a significant change, but I found that the skills I had honed in the automotive industry were incredibly valuable in my new role. In my current position in industrial manufacturing, the demand for quality workmanship and meticulous attention to detail is paramount. Fortunately, these are traits that I have cultivated throughout my years in the automotive industry. I take pride in applying these skills to meet the high standards expected in the manufacturing sector.